Flat foot correction insole, children's collapsed shoe orthosis

  Flat foot correction insole, children's collapsed shoe orthosis   Features: breathable and light, elastic bandage, metatarsal support, protection of arch and care of feet Structure: filled with elastic cotton, not tired when stepping flat, breathable and light, easy to exercise Quality: hand sewing, quality assurance Only by accurately supporting the arch can the pain of flat foot be effectively relieved Users: 1. Congenital flat foot 2. The arch collapse caused by the day after tomorrow 3. Long-term standing walking group 4. Wearing high heels for a long time 5. Old people 6. Sports people improve and relieve the pain of heel, ankle, knee and knee caused by fatigue, help improve walking posture, let breathing and body circulation system be smoother, increase exercise endurance and reduce knee wear. SHIJIAZHUANG AOSUO O&P

Aug 30,2021

Foot arch pad

Foot arch pad   Set of 2 pieces, made of silica gel, with good flexibility and no deformation Hook and loop can adjust the size and looseness, which is suitable for men, women and children, and is very practical Easy to use, easy to wear, socks can be worn, and there are massage points on the soles of the feet to stimulate the acupuncture points on the soles of the feet If you didn't get used to wearing at first, so you don't need to wear them for too long Silica gel, also known as silicic acid gel, is a porous material. It has the excellent characteristics of strong adsorption, good elasticity, aging resistance, cold resistance and high temperature resistance, and is favored by people in the shoe industry. Hook and loop design Hook and loop, also known as velcro, is a commonly used connecting accessory in the textile industry, which is divided into two sides, one side is small and soft fiber round hair, and the other side is hard barbed hair with hooks Massage antiskid There is a massage dot design in the center of the arch pad, which fits the center of the foot, is comfortable and soft, and has a ventilation hole design to keep the foot fresh   SHIJIAZHUANG AOSUO O&P

Aug 27,2021

Medical ankle-foot orthosis

Medical ankle-foot orthosis Features: Made of polypropylene, the semi-hard sole helps to lift the toe when swinging, and the thin sole is also convenient to modify according to the needs of patients The hollowed-out design of the heel makes the wearer feel comfortable and easy to wear Divided into left/right foot design Indications: Vertical foot caused by stroke of brain Vertical foot secondary to peripheral nervous system Ankle prevention of hemiplegia or paralysis of lower limbs Color: transparent Polypropylene material has certain strength and flexibility The hollowed-out design of the heel makes the ankle joint have certain mobility and wear more comfortable It can be put in shoes, making it easier to travel

Aug 26,2021

COSMETIC HAND

COSMETIC HAND   Prostheses are generally functional prostheses and  cosmetic prostheses. Functional prostheses focus on functions, while cosmetic prosthetic hands have no functions and can only play a decorative role, but they look like real hands .     Our company’s prosthetic hands are made of imported organic silica gel. They are made through a special process. They have long service life, good hand feel, more lifelike, tear resistance, and high oxidation resistance. They are superior to ordinary inorganic silica gel materials. On the one hand, it can be customized according to the patient's size, and the color is available in No. 18 colors. On the other hand, for some customers with less strict size requirements, you can choose to use the standard size, and the color is also available in No. 18, which is convenient and can save a lot of money.   About beauty hands and beauty fingers Use decorative fingers and partial hand prostheses to replace amputated fingers or partial hands. Many people think that the beauty of hands or fingers is purely to look good. In fact, they not only play a decorative role, but also play a role of support when grabbing objects. For other people, the decorative fingers or parts of the hands that they don’t usually notice when they first see it are artificial limbs. This decorative cosmetic hand or finger can be customized according to the actual situation of the user. The shape, size, and color of the artificial hand (finger) can all be customized according to the patient.   About the seam and thickness of the beauty finger The beauty finger is directly put on the residual limb, so there must be a seam at the very end after putting it on. This is unavoidable~ It is impossible to make a very thin finger prosthesis. If it is made very thin, it is easy to wear and break, so in order to ensure the strength, it must have a certain thickness, and because the beauty finger is sleeved on the residual limb, and the residual limb It is often different from the thickness of the fingers on the uninvolved side, and even thicker than the same part of the fingers on the uninvolved side. Therefore, after wearing a finger prosthesis , it will generally be thicker than the fingers on the uninvolved side. The longer and thicker the stump, the greater the difference. Finger prosthesis is a relatively beautiful product that cannot be absolutely lifelike. The condition of each person's residual limb is different, and the effect produced will vary from person to person.   Care and cleaning of beauty hands and fingers Compared with the myoelectric hand, the beauty hand can be worn on the body from morning to night every day when the internal and external daily care is done. You only need to use water and soap (shower gel, etc.) during care. Usually we also ask patients to apply Dabao on the fake hands to make the fake hands more shiny and look more realistic~   SHIJIAZHUANG AOSUO O&P  

Aug 25,2021

Lower Proshthetic

Lower Proshthetic   Walking is the most basic function of the lower limbs of the human body. Any level of amputation of the lower limbs (except toes) will cause difficulty in walking. Poor walking posture can also greatly interfere with a person's overall beauty. Therefore, the basic purpose of lower limb prosthesis is to restore a person's normal walking posture as much as possible. At present, lower limb prostheses can be divided into several categories according to the different amputation planes of the lower limbs: foot and ankle prostheses, calf prostheses, thigh prostheses, and hip prostheses. Regardless of the level of the prosthesis after amputation, it can achieve the purpose of supporting the body and walking.   (1) Hip joint prosthesis: suitable for patients with hip amputation or short thigh stump. (2) Foot and ankle prosthesis: suitable for patients with foot and ankle amputation. (3) Thigh prosthesis, foam decorative jacket, lifelike appearance, full contact cavity, advanced joint design, perfect gait. (4) Calf prosthesis   SHIJIAZHAUNG AOSUO O&P

Aug 19,2021

Upper Prosthetic

Upper  Prosthetic  A prosthesis is an artificial prosthesis that is specially designed and assembled to make up for amputees or incomplete limb defects by means of engineering techniques and methods, also known as "prosthetics." Its main function is to replace some of the functions of the limbs, so that the amputee can restore a certain degree of self-care and work ability.        The classification of prostheses is divided into upper limb prostheses and lower limb prostheses according to the amputation site.     The materials used to make prostheses are mainly aluminum plates, wood, leather, plastics and metal mechanical parts. A good prosthesis must have the conditions such as good function, comfortable and convenient to wear, light and durable, and appearance similar to a healthy limb. Among the many prostheses we use, there are many different classifications and names according to the purpose, location, and control system of the prosthesis. The following is a brief introduction to the frequently used and more advanced prostheses. (1) Decorative upper limb prosthesis: This kind of prosthesis does not have the function of self-care for work and life. The main function is to make up for the appearance of the upper limbs and maintain the balance of the limbs. Mainly used for upper arm high amputation, shoulder joint disconnection, shoulder girdle disconnection 2) Tool hand: It is specially designed and made for upper limb amputees, and it is mainly composed of two parts. One is the arm tube installed on the residual limb, the arm tube is fixed on the residual limb, and the end of the arm tube has a tool adapter. The second is a variety of labor tools and daily life tools, such as hammers, screwdrivers, knives, multi-purpose hooks and other labor tools, toothbrushes, spoons and other life tools. Through the adapter, various tools and living utensils can be replaced at any time according to needs, and to a certain extent, the patient's working ability and self-care ability can be restored. However, the tool hand does not have the normal physical shape of a person, and the range of use is also very limited. (3) Traction-type mechanical prosthetic hand: This kind of prosthetic hand is also called motorized prosthetic hand and mechanical prosthetic hand, which is a substitute for human hand. This kind of artificial hand relies on the coordinated movement of the user's own residual limbs and healthy limbs to drive the traction cable, manipulate and control the opening and holding of the artificial hand, and realize the action of grasping the extracted object. This kind of prosthetic hand is mainly suitable for the disabled forearm and upper arm. Because it is simple in structure, reliable in performance, easy to master, easy to use, and low in price, it is more commonly used in China. 4) Electric prosthesis: The electric prosthesis is an externally powered prosthesis, which relies on a small electromechanical drive system to complete the predetermined movements of each joint of the prosthetic hand, so that the disabled can basically take care of themselves and participate in appropriate work. This kind of prosthesis is suitable for forearm or even full arm defect.   (5) EMG prosthesis: EMG prosthesis is a kind of external power type prosthesis directly innervated by the cerebral nerves. It is a product of modern high-tech technologies such as precision machinery, microelectronics and technology, materials science, and physiology and medicine. The control system of this kind of prosthesis sends out electromyographic signals when the brain nerves innervate the muscles of the limbs to contract and transmit them to the skin surface. After the control system receives the signal, it drives the micro-motor to produce the action. It can generally complete three sets of movements: finger extension and flexion, wrist extension and flexion, and wrist rotation inside and outside. It is highly intuitive when used and has good bionic effects. It is the development direction of modern prostheses and is suitable for the disabled with front buttocks defects.   (6) Voice-activated prosthesis: Voice-activated prosthesis is an externally powered prosthesis that uses language as a control signal. The characteristic of this kind of prosthesis is that there are many human language signals, so it produces many movements, and it is easier to meet the needs of the disabled to take care of themselves. Its advantage lies in that it is not restricted by factors such as the degree of disability of the amputation patient, the length of the amputation time and other factors, and is especially suitable for the disabled with upper arm, full arm, or double arm, thigh, and double leg amputation. But its disadvantage is that it is easy to be restricted by environmental factors due to the sound control of the prosthesis, and it is also easy to be interfered by the language of others.   SHIJIAHUZANG AOSUO O&P

Aug 16,2021