This is a new leg for the disabled. The leg prosthesis is installed, and there is no need for crutches and other supporting objects to go out, so how to solve the problems encountered in the use of leg prosthesis?

1. Lower leg prosthesis receiving cavity is more and more unsuitable, always feel prosthesis will fall. Most of the problems caused by atrophy of residual limbs or thinning of lining materials after long-term use can be properly eliminated, but the better way is to replace the receiving cavity.

2. There is sound at the joint of the pipe joint. If there is noise, check whether the fixing screw at the pipe joint is loose. In many cases, because the contact surface of the fixing screw is too small and the strength is not enough, the contact is not in place after a period of use. Use a special screwdriver to fix the fixing screw. After fixing, it can be basically eliminated.

3. When the leg prosthesis is worn to walk, the step is laborious or the person rushes forward.

This is usually caused by changes in heel height. The height is lower than the original heel, and the height will be higher than the original height. A temporary solution is to temporarily remove something from the heel or front foot. However, it is important to remind everyone not to use hard objects to avoid damaging the feet. Filling is only a temporary adjustment, wearing the right heel is the key.

After the prosthesis is is installed, it must be cleaned at ordinary times, otherwise it will easily cause skin diseases.